Electrolytic Aluminum Crane

 

Electrolytic aluminum crane 

Electrolytic aluminum crane is a specially designed material handling double girder overhead crane for large prebaked sintering anodes electrolytic aluminum plant in aluminum smelting industry. Electrolytic aluminum crane can largely improve the working conditions and efficiency in aluminum plant. DQCRANES gantry crane suppliers can provide customized electrolytic aluminum overhead crane for your workshop and plant.

Applications of Electrolytic aluminum crane

  • Electrolytic aluminum crane is mainly used in large scale aluminum plants to tap hot metal from electrolytic cells, raise beam, remove floor slab, remove and replace pot shell, etc.
  • Electrolytic aluminum overhead crane can be used continuously in extreme temperatures and in an electrically charged environment with high levels of magnetic flux.

Functions of Electrolytic aluminum crane

  • Electrolytic aluminum crane is specially designed for the aluminum plant which can pleasantly meet the demands of the applications with the following functions:
  •  Hit electrolyte crust in electrolytic bath;
  • Add alumina powder in electrolytic bath with feeding system;
  • Replace the anode with twist draw mechanism;
  • Tapping trolley loads the molten aluminum ladle in order to absorb molten aluminum and transport the ladle;
  • Lift positive bar by the electric hoist;
  • Install and overhaul the electrolytic bath;
  •  Other material handling works, etc.

Features of electrolytic aluminum crane

  • The product adopt fully hydraulic, Pneumatic System.
  • The main trolley has the function such as crust breaking, go up and down, Crust breaking head tilt and continuous knock.
  • The feed pipe can go up and down and rotate. The feed bin vibrate on time automatically, has the material level auto-alarm function.
  • The cabin room can do horizontal rotation and be installed with auto lift straight ladder.
  • The trolley is installed with auto counterpoint feeding system.
  • All adopt PLC control, have both cabin room control and remote control. It adopt more techniques such as overload limiter, aluminum discharging electronic scale load weighing device, OSD, etc.
  • Radio remote operation gives crane operators best visibility and high safety.
  • Besides main brakes on gearbox first reduction shaft, a safety disk brakes is installed on the main crane barrel of hoist.
  • High quality motors and controls are adopted to withstand high temperature and humidity in the special environment.
  • Multiple insulations is provided at hook, on frame and between frame and crane bridge, which ensures electrolytic aluminum crane to work safely in the charged working conditions.

Safety features of electrolytic aluminum crane

Safety always ranks top. In order to ensure the safety of your material handling equipment and working staff, the following devices are shown as follow:

  • Crane traveling limit switch
  • Crane weight overload protection device
  • Lifting height limit device
  • Voltage lower protection and phase sequence protection function
  • Emergency stop device
  • Warning devices: flashing lights and warning sound.
  • Wireless infra-detector for anti-collusion, etc.

评论

发表评论

此博客中的热门博文

Wire Rope Electric Hoists Inspections

  1.Wire rope electric hoist motor temperature rise is too high. First of all, check whether the  wire rope electric hoist  is overloaded. The overload causes the motor to heat up. Then check whether the motor bearing is damaged or not, and whether the motor works according to the regulations. When the motor is running, if the brake clearance is too small, will generate a large frictional force. The frictional heat also increases the additional load. 2.Wire rope electric hoist can not start after heavy objects rise to mid-air, or after parking can not re-start. First check if the system voltage is too low or the fluctuation is too large. If it is, restart it only after the voltage returns to normal. On the other hand, if it cannot be started after stopping, pay attention to whether there is a phase loss in the operation of the three-phase motor. 3.Can not stop working. The power should be cut off immediately, the wire rope electric hoist should be forcibly stopped, and th...
阅读全文

JM Series Electric Winches

图片
  JM series electric winches is a gear reducer type drive type winch, which is mainly used for handling materials under 10 tons. JM electric winches can be used to hoist, pull, load and draw heavy weights. It also can be applied to various large and medium concrete structure and the installation and disassembly of mechanical equipment. JM Series Electric Winches are suitable for the civil construction and installation project in construction and installation company, mine lot and factory. JM series electric winches
阅读全文

Overhead Crane Solution Saves Your Space

图片
  Paraguay EPS Sandwich Panel Factory Crane project Case Study Overhead crane introduction Overhead Cranes  also named Bridge Cranes or Electrical Overhead Traveling (EOT) Cranes is kind of industrial lifting equipment, which is widely used in various industrial applications for material handling to improve working efficiency and safety. According to the material handling purpose and structure, the overhead crane can mainly be classified into the following type, Low Headroom Single Girder Overhead Crane QDY Ladle Overhead Crane, Single Girder Suspension overhead Crane, Double Girder Electric  hoist crane , Explosion Proof Bridge Crane, Explosion-proof Single Girder Overhead Crane, Electromagnetic Overhead Crane, Single Girder Electric Hoist Crane up, Overhead Crane With Hook, Grab Bucket Overhead Crane, Insulation Overhead Crane and Double Trolley Overhead Crane, etc. Among the various overhead cranes, how to choose the optimal one for your applications? It depends on you...
阅读全文