Why choose Mobile jib crane

 Mobile jib crane rated load: 0.125-0.5t,   Mobile jib crane base width: 1200-1400mm,  Mobile jib crane stand bar width: 1018-1218mm,  Mobile jib crane L&h: 3000mm,Mobile jib crane H: 3700-3900mm

Mobile jib crane and movable jib crane is your flexible material handling solution. Mobile jib crane is flexible and cost-effective for light material handling. Dongqi mobile and movable jib crane is your affordable lifting solution.

Mobile jib crane is one of the most flexible material handling jib cranes offered by Dongqi Hoist and Crane, the well-known crane company is China.

Mobile jib crane is the most flexible and mobile lifting crane with modern design and manufacturing techniques. Mobile jib crane is widely used for its advantage of high flexibility, it is the indispensable hoist equipment of automatic production line.

Compared to pillar jib crane and wall jib crane, mobile jib cranes do not need cement foundation.
So you can place it anywhere in the plant based on your need. Dongqi mobile jibs has scientific design and high quality, which can meet your requirement of short distance and frequent task.

评论

发表评论

此博客中的热门博文

Overhead crane safety tips card Operating the Crane and Moving the Load

  Fatalities or serious injuries can occur if   overhead cranes   are not inspected and properly used. Fatalities may occur when workers are struck by a load, or pinched between the load and another object. The following are some safety tips for overhead crane operators to follow while operating the crane machine and moving the load. •Do not engage in any activity that will divert your attention. •Do not lift, lower, or transport a load with the crane or hoist until all personnel are clear of the load and the load’s path. • Verify that the load, crane and hoist will clear all obstacles before moving or rotating the load. •Do not move loads over personnel. •Do not lift, lower, or transport personnel by means of the crane, hoist, trolley, hoist hook, or load. • Slowly inch the hook into engagement with the load to eliminate wire rope slack and reduce impact loading of the crane and hoist. • Avoid unnecessary inching and quick reversals of direction. • Lift the load only a few inches to
阅读全文

Single Speed Electric Wire Rope Hoist

  Electric wire rope hoist is a type of electric hoists for material handling, installed on a   single beam crane,   linear curve strander beams or it can be used at the hoisting mechanism of   double beam crane , gantry crane, linear crane for material handling by industrial and mining enterprises, railways, and warehouses, etc. The lifting capacity of single speed electric wire rope hoist is 0,5 to 32 ton and the working class is M3 and M4. The main parameters of electric wire rope hoist is as follow: Product Type CD1 Lifting Capacity of High Speed Hoist 0.5~32t Lifting Height High Speed Hoist 6~50m Lifting Speed High Speed Hoist 8 m/ min Travelling speed 20,30m/min Working Class High Speed Hoist M3,M4 Ambient Temperature -25~40℃
阅读全文

Wire Rope Electric Hoists Inspections

  1.Wire rope electric hoist motor temperature rise is too high. First of all, check whether the  wire rope electric hoist  is overloaded. The overload causes the motor to heat up. Then check whether the motor bearing is damaged or not, and whether the motor works according to the regulations. When the motor is running, if the brake clearance is too small, will generate a large frictional force. The frictional heat also increases the additional load. 2.Wire rope electric hoist can not start after heavy objects rise to mid-air, or after parking can not re-start. First check if the system voltage is too low or the fluctuation is too large. If it is, restart it only after the voltage returns to normal. On the other hand, if it cannot be started after stopping, pay attention to whether there is a phase loss in the operation of the three-phase motor. 3.Can not stop working. The power should be cut off immediately, the wire rope electric hoist should be forcibly stopped, and the repair the c
阅读全文