KBK crane system VS other suspension overhead crane

KBK crane system VS other suspension overhead crane

  • High strength steel track, cold rolled forming, no deformation.
  • Closed type C and type Ω track design: The track design can effectively avoid dust, so as to reduce the trolley wheel wear and prolong service life.
  • 2° inclined plane track design: It can effectively ensure that the trolley is located in the center of the track and reduce the sliding resistance to the maximum extent.
  • Large distance of hanging point: Special track structure design, the maximum distance of hanging point is 9 meters, greatly reduce the number of columns, reduce the interference to the work space, so that the layout of the workshop is more beautiful.
  • Low equipment cost: Its own structure reduces the use of steel structure, so that the cost is greatly reduced.
  • Large lifting capacity: The maximum load can reach to 5000KG.

    评论

    发表评论

    此博客中的热门博文

    Overhead crane safety tips card Operating the Crane and Moving the Load

      Fatalities or serious injuries can occur if   overhead cranes   are not inspected and properly used. Fatalities may occur when workers are struck by a load, or pinched between the load and another object. The following are some safety tips for overhead crane operators to follow while operating the crane machine and moving the load. •Do not engage in any activity that will divert your attention. •Do not lift, lower, or transport a load with the crane or hoist until all personnel are clear of the load and the load’s path. • Verify that the load, crane and hoist will clear all obstacles before moving or rotating the load. •Do not move loads over personnel. •Do not lift, lower, or transport personnel by means of the crane, hoist, trolley, hoist hook, or load. • Slowly inch the hook into engagement with the load to eliminate wire rope slack and reduce impact loading of the crane and hoist. • Avoid unnecessary inching and quick reversals of direction. • Lift the load only a few inches to
    阅读全文

    Single Speed Electric Wire Rope Hoist

      Electric wire rope hoist is a type of electric hoists for material handling, installed on a   single beam crane,   linear curve strander beams or it can be used at the hoisting mechanism of   double beam crane , gantry crane, linear crane for material handling by industrial and mining enterprises, railways, and warehouses, etc. The lifting capacity of single speed electric wire rope hoist is 0,5 to 32 ton and the working class is M3 and M4. The main parameters of electric wire rope hoist is as follow: Product Type CD1 Lifting Capacity of High Speed Hoist 0.5~32t Lifting Height High Speed Hoist 6~50m Lifting Speed High Speed Hoist 8 m/ min Travelling speed 20,30m/min Working Class High Speed Hoist M3,M4 Ambient Temperature -25~40℃
    阅读全文

    Wire Rope Electric Hoists Inspections

      1.Wire rope electric hoist motor temperature rise is too high. First of all, check whether the  wire rope electric hoist  is overloaded. The overload causes the motor to heat up. Then check whether the motor bearing is damaged or not, and whether the motor works according to the regulations. When the motor is running, if the brake clearance is too small, will generate a large frictional force. The frictional heat also increases the additional load. 2.Wire rope electric hoist can not start after heavy objects rise to mid-air, or after parking can not re-start. First check if the system voltage is too low or the fluctuation is too large. If it is, restart it only after the voltage returns to normal. On the other hand, if it cannot be started after stopping, pay attention to whether there is a phase loss in the operation of the three-phase motor. 3.Can not stop working. The power should be cut off immediately, the wire rope electric hoist should be forcibly stopped, and the repair the c
    阅读全文