What is Manual hoist and hand hoist

Manual hoist and hand hoist is a type of light hand operated hoisting equipment, which solves the material handling problems with man power, with the features of easy operation, cost-effective, wide application, etc.

Manual hoist and hand hoist- Chain type

CB-1 manual hoist

 CB-1 manual hoist is a type of hand hoist with the features of easy operation and carrying which is widely used in factories, mines, construction sites, agricultural production, and wharf, docks, and warehouses, etc., for simple material handling.

 

CB1 manual hoist

CB1 manual hoist

Features of CB-1 manual hoist

On the structural design and operational performance of CB1 series of manual hoists have the following features:

  1. The manual hoist is safe and high reliable, and easy to maintain.
  2. The manual hoist has high efficiency with small chain pulling force.
  3. The manual hoist is low dead weight and is easy to be carried along.
  4. The manual hoist is designed elegantly and with durability.

CB-1 series manual hoists specification

Lifting heightLoad chain

Dimension

Force of full loadN.W/G.WAdditional weight per 1m lift
1 ton manual hoist2.56*1825014.5/150.8
1.5 ton manual hoist2.57.1*2.126516.5/171.1
2 ton manual hoist2.58*2433519.5/20.11.4
3 ton manual hoist310*3037232/342.2
5 ton manual hoist39*2736041.1/43.63.8
10 ton manual hoist310*3038075.7/79.18.8

CB11 series manual hoists

CB11 series manual hoist and manual hoist drawings

CB11 series manual hoist and manual hoist drawings

CB11 series manual hoists specification

Lifting heightLoad chain

Dimension

Force of full loadN.W/G.WAdditional weight per 1m lift
1 ton manual hoist2.56*1825014.5/150.8
1.5 ton manual hoist2.57.1*2.126516.5/171.1
2 ton manual hoist2.58*2433519.5/20.11.4
3 ton manual hoist310*3037232/342.2
5 ton manual hoist39*2736041.1/43.63.8
10 ton manual hoist310*3038075.7/79.18.8

VC-B manual hoist

 

VC-B manual hoist

VC-B manual hoist and hoist drawings

评论

发表评论

此博客中的热门博文

Overhead crane safety tips card Operating the Crane and Moving the Load

  Fatalities or serious injuries can occur if   overhead cranes   are not inspected and properly used. Fatalities may occur when workers are struck by a load, or pinched between the load and another object. The following are some safety tips for overhead crane operators to follow while operating the crane machine and moving the load. •Do not engage in any activity that will divert your attention. •Do not lift, lower, or transport a load with the crane or hoist until all personnel are clear of the load and the load’s path. • Verify that the load, crane and hoist will clear all obstacles before moving or rotating the load. •Do not move loads over personnel. •Do not lift, lower, or transport personnel by means of the crane, hoist, trolley, hoist hook, or load. • Slowly inch the hook into engagement with the load to eliminate wire rope slack and reduce impact loading of the crane and hoist. • Avoid unnecessary inching and quick reversals of direction. • Lift the load only a few inches to
阅读全文

Wire Rope Electric Hoists Inspections

  1.Wire rope electric hoist motor temperature rise is too high. First of all, check whether the  wire rope electric hoist  is overloaded. The overload causes the motor to heat up. Then check whether the motor bearing is damaged or not, and whether the motor works according to the regulations. When the motor is running, if the brake clearance is too small, will generate a large frictional force. The frictional heat also increases the additional load. 2.Wire rope electric hoist can not start after heavy objects rise to mid-air, or after parking can not re-start. First check if the system voltage is too low or the fluctuation is too large. If it is, restart it only after the voltage returns to normal. On the other hand, if it cannot be started after stopping, pay attention to whether there is a phase loss in the operation of the three-phase motor. 3.Can not stop working. The power should be cut off immediately, the wire rope electric hoist should be forcibly stopped, and the repair the c
阅读全文

What is monorail crane system

  Monorail systems may have various kinds of operating systems. Several monorail system are electrical, and count on an electrical motor. The monorail cranes that make use of for really heavy loads frequently need a pneumatically-driven or hydraulic operating system. Some monorail systems with extremely standard versions might even rely on a hand-operated procedure, where employees connect an object to the hoist and after that move the cart from one end of the monorail to the other manually. Monorail crane is one type of monorail system, also called single girder  overhead crane , which is replacement of conventional cranes or conveyors. The monorail crane is usually used to handle materials, loads, and products within a restricted location, as opposed to throughout an entire building. According to the monorail designs, the monorail crane may be designed into the structure of a building/shop, where they enter into the building/shop via ceiling or columns, or added later on utilizing di
阅读全文